¿Qué está mal?

Aviso: Antes de informar sobre un error con la descarga, por favor, prueba el enlace directo: Laboratory Manual for DC Electrical Circuits

Cargando...

Debes iniciar sesión para hacer esto.

Laboratory Manual for DC Electrical Circuits

Laboratory Manual for DC Electrical Circuits

Laboratory Manual for DC Electrical Circuits

Puntuación: ---- | 0 votos
| Enviando voto
| ¡Votado!
|

Detalles del libro:

pos
Global
pos
Categoría
Año:2013
Editor:Dissidents
Páginas:71 páginas
Idioma:inglés
Desde:25/02/2014
Tamaño:1.22 MB
Licencia:Pendiente de revisión

Contenido:

This manual is intended for use in a DC electrical circuits course and is appropriate for two and four year electrical engineering technology curriculums. The manual contains sufficient exercises for a typical 15 week course using a two to three hour practicum period. The topics range from basic laboratory procedures and resistor identification through series-parallel circuits, mesh and nodal analysis, superposition, Thevenin’s Theorem, Maximum Power Transfer Theorem, and concludes with an introduction to capacitors and inductors. For equipment, each lab station should include a dual adjustable DC power supply and a quality DMM capable of reading DC voltage, current and resistance. A selection of standard value ¼ watt carbon film resistors ranging from a few ohms to a few megohms is required along with 10 kΩ and 100 kΩ potentiometers, .1 µF and .22 µF capacitors, and 1 mH and 10 mH inductors. A decade resistance box may also be useful.

Each exercise begins with an Objective and a Theory Overview. The Equipment List follows with space provided for serial numbers and measured values of components. Schematics are presented next along with the step-by-step procedure. All data tables are grouped together, typically with columns for the theoretical and experimental results, along with a column for the percent deviations between them. Finally, a group of appropriate questions are presented. For those with longer scheduled lab times, a useful addition is to simulate the circuit(s) with a SPICE-based tool such as Multisim or PSpice, and compare those results to the theoretical and experimental results as well.

Categorías:

Etiquetas:

Cargando comentarios...

Escaneando listas...

El libro en números

Posición global

posición en categoría

en catálogo desde

25/02/2014

puntuación

Nothing yet...

votos

Nothing yet...

'LIKES' sociales

Nothing yet...

Visitas

Descargas

Esto puede tardar un momento

Interés

Segmentación por países

Esto puede tardar un momento

Páginas de entrada

Segmentación por sitios web

evolución

Esto puede tardar un momento

Cargando...